sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 397 |
| Poids du tir | g | 362 |
| Vitesse de tir | mm/s | 196 |
| Diamètre de la vis | mm | 45 |
| Pression d'injection | MPa | 228 |
| Rapport L:D de vis | -- | 23.5 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 1780 |
| Coup d'ouverture | mm | 450 |
| Espace entre les barres de liaison | mm x mm | 485 x 465 |
| Épaisseur du moule(min) | mm | 180 |
| Épaisseur du moule(max) | mm | 520 |
| Course d'éjection hydraulique | mm | 130 |
| Force d'éjection hydraulique | kN | 70 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 19 |
| Capacité de chauffage | kW | 16.3 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 220 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 5900 mm |
| B | 3000 mm |
| C | 595 mm |
| D | 370 mm |
| E | 60 mm |
| F | 1750 mm |
| G | 1100 mm |
| H | 1150 mm |
| I | 724 mm |
| J | 2100 mm |
| K | 4220 mm |
| L | 1740 mm |
| M | 950 mm |
| N | 990 mm |
| O | 1430 mm |
Why it's not recommended to have an IML solution with more than 4 cavities for containers which request a wrap+bottom labeling?
For an IML container which request a wrap + bottom labeling will need 2 labels and request a reverse injection technology. With two labels means that there would be 2 sets of magazines and mandrel to stock and pick the labels for the containers. A four cavities design of the mold there would be sufficient space in the IML robot to fit in the extra magazines, but for more cavities mold design the size of the magazine will exceed the limit of the IML robot and will reduce the efficiency of the robot. It would not be an ideal solutions for Wrap + Bottom IML Solutions
Technologie IML Express
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
